Epson PowerLite 4100 설치 핸드북 - 페이지 5

{카테고리_이름} Epson PowerLite 4100에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 4100 8 페이지. Warranty statement
Epson PowerLite 4100에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (9 페이지), 운영 매뉴얼 (47 페이지), 빠른 참조 (7 페이지), 적합성 선언 (4 페이지), 설치 핸드북 (4 페이지)

페이지 인쇄

Epson PowerLite 4100 / 4200W / 4300

Use the

pointer button to move the pointer on the screen.

Press the

button once to left-click, or twice to double-click.

Enter

Press the

button to right-click.

Esc

To drag-and-drop, hold down the

pointer button to drag the object. When it's where you want

it, release the

button.

Enter

Operating Two or More Projectors With

the Remote Control

If you're using more than one projector, you can control all the

projectors—or just selected ones—by using the projector ID system.

To operate a projector, set the remote control's ID to match that of

the projector. Or you can control all the projectors at once by setting

the remote control's ID to zero.

Setting the Projector ID

The projector's default ID is set to O . This lets it respond to

commands from any remote control. To change the ID, follow these

steps:

1. Press the

button on the remote control. You see the

projector's menu screen.

2. Select

, press

Extended

again.

Enter

button. Then use the

Enter

, select

Enter

Projector ID

, then press

INSTALLATION HANDBOOK

Remote Control Information