Epson PowerLite 4100 설치 핸드북

{카테고리_이름} Epson PowerLite 4100에 대한 설치 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Epson PowerLite 4100 8 페이지. Warranty statement
Epson PowerLite 4100에 대해서도 마찬가지입니다: 시작하기 매뉴얼 (9 페이지), 운영 매뉴얼 (47 페이지), 빠른 참조 (7 페이지), 적합성 선언 (4 페이지), 설치 핸드북 (4 페이지)

페이지 인쇄

Epson PowerLite 4100 / 4200W / 4300

note

If a button is pressed longer

than 30 seconds, the remote

control stops operating to

conserve battery power.

When you release the

button, normal operation

resumes.

note

Using the remote under

bright uorescent lamps or

in direct sunlight may a ect

projector response.

Using the Remote Control

Make sure batteries are installed. Follow these

tips for using the remote control:

Point the remote control at the front of the projector or at the

screen.

Stand within 49 feet (15 meters) of the projector.

Controlling the Picture

You can use the remote control to preview and select your picture

sources, temporarily turn o the picture, freeze the action, and zoom

in on the picture.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or

video source, you can switch between the di erent sources:

The easiest way to select your source is to press the

on the remote control (or the

projector) repeatedly until you see the image you want on the

screen.

On the remote control, you can press one of the

to select the connected device you need.

After you select a source, the screen goes dark for a moment before the

image appears.

INSTALLATION HANDBOOK

button on the

Source Search

Source

Remote Control Information

button

buttons