Epson Stylus Pro 4800 Portrait Edition Kurzreferenz-Handbuch - Seite 3

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Software Epson Stylus Pro 4800 Portrait Edition herunter. Epson Stylus Pro 4800 Portrait Edition 12 Seiten. Stylus pro 800 series
Auch für Epson Stylus Pro 4800 Portrait Edition: Setup-Handbuch (15 seiten), Broschüre & Specs (8 seiten), Handbuch "Erste Schritte (10 seiten), Handbuch (17 seiten), Wichtige Informationen (2 seiten), Eingeschränkte Garantie (12 seiten), Broschüre & Specs (6 seiten), Installationshandbuch (4 seiten), Broschüre & Specs (16 seiten)

Loading Paper in the Tray

Make sure the printer is on and roll paper is not loaded

for printing.

Pull out the paper tray and cover.

Lift up the paper tray cover.

Flip up the paper guide roller and slide the edge

guide all the way to the left.

Thumb through a stack of paper, then gently tap it

on a ﬂat surface to even the pages.

Load the sheets in the portrait orientation, short

edge ﬁrst, with the printable side face-down. Place

the paper all the way back, against the right side of

the tray.

Don't load paper above the arrow mark inside the

edge guide.

Caution:

When you add more paper, always line up

the edges with the paper already in the tray.

Adjust the paper tray and edge guide according

to the paper size. For small sheets, raise the paper

guide and move it to the edge of the stack.

Flip down the paper guide roller, then replace the

paper tray cover and adjust its length.

Note:

Make sure the roll paper support is

not raised.

Press the

Paper Source button until you see the

cut sheet icon.