Epson Stylus Pro 4800 Portrait Edition Hızlı Referans Kılavuzu - Sayfa 3

Yazılım Epson Stylus Pro 4800 Portrait Edition için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson Stylus Pro 4800 Portrait Edition 12 sayfaları. Stylus pro 800 series
Ayrıca Epson Stylus Pro 4800 Portrait Edition için: Kurulum Kılavuzu (15 sayfalar), Broşür ve Teknik Özellikler (8 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Manuel (17 sayfalar), Önemli Bilgiler (2 sayfalar), Sınırlı Garanti (12 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar), Kurulum Kılavuzu (4 sayfalar), Broşür ve Teknik Özellikler (16 sayfalar)

Epson Stylus Pro 4800 Portrait Edition Hızlı Referans Kılavuzu

Loading Paper in the Tray

Loading Paper in the Tray
Make sure the printer is on and roll paper is not loaded
for printing.
1
Pull out the paper tray and cover.
2
Lift up the paper tray cover.
3
Flip up the paper guide roller and slide the edge
guide all the way to the left.
4
Thumb through a stack of paper, then gently tap it
on a flat surface to even the pages.
5
Load the sheets in the portrait orientation, short
edge first, with the printable side face-down. Place
the paper all the way back, against the right side of
the tray.
Don't load paper above the arrow mark inside the
edge guide.
Caution:
When you add more paper, always line up
the edges with the paper already in the tray.
6
Adjust the paper tray and edge guide according
to the paper size. For small sheets, raise the paper
guide and move it to the edge of the stack.
7
Flip down the paper guide roller, then replace the
paper tray cover and adjust its length.
Note:
Make sure the roll paper support is
not raised.
8
Press the
Paper Source button until you see the
cut sheet icon.
2