Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Kurzreferenz-Handbuch - Seite 7

Blättern Sie online oder laden Sie pdf Kurzreferenz-Handbuch für Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst herunter. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 12 Seiten. Warranty statement
Auch für Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Spezifikationsblatt (6 seiten), Erste Schritte (13 seiten), Broschüre & Specs (6 seiten), Setup-Handbuch (16 seiten), Netzwerk-Handbuch (46 seiten), Installationshandbuch (4 seiten), Produktinformation Handbuch (16 seiten), Eingeschränkte Garantie (12 seiten)

Seite drucken

Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Kurzreferenz-Handbuch

Replacing Ink Cartridges (continued)

Hold the cartridge with the arrow mark pointing

toward the printer. Then insert the cartridge into the

slot. Don't force it.

Note:

If you can't insert the cartridge smoothly,

you may have the wrong cartridge. Check the

package and product code. If the ink light remains

on after installing the cartridge, try removing and

then reinserting it.

Replacing Printer Parts

Replacing the Cutter Blade

If you notice that the paper isn't cut cleanly, you may need

to replace the cutter blade (part # C12C815291). You can

check its status as described below:

Press the Menu button on the printer, then press the

button until you see PRINTER STATUS.

Press Menu, then press the button until you see

SERVICE LIFE.

Press the Menu button, then press the button until

you see CUTTER. E*****F indicates a new cutter. If

no stars are displayed, the cutter needs to be replaced.

Caution:

Do not use the cutter for the

following media:

•

Fine art paper (such as Epson UltraSmooth

Textured, or Velvet)

•

Canvas

•

Vinyl

•

Matte board

•

Heavyweight polyester banner media

Return the ink lever to its locked position.

If you're using 110 ml cartridges, close the ink

compartment cover. If you're using 220 ml

cartridges, you'll have to leave the cover open.

Follow these steps to replace the cutter:

Press the Menu button on the printer, then press

the button until you see CUTTER REPLACE.

Press the Menu button to display EXEC, then press

the Menu button again. The print head moves to the

cutter replacement position.

Open the top cover.

Continue