Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Quick Reference Manual - Page 7

Browse online or download pdf Quick Reference Manual for Software Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 12 pages. Warranty statement
Also for Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Specification Sheet (6 pages), Getting Started (13 pages), Brochure & Specs (6 pages), Setup Manual (16 pages), Network Manual (46 pages), Installation Manual (4 pages), Product Information Manual (16 pages), Limited Warranty (12 pages)

Print Page
Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Quick Reference Manual
Replacing Ink Cartridges (continued)
5
Hold the cartridge with the arrow mark pointing
toward the printer. Then insert the cartridge into the
slot. Don't force it.
Note:
If you can't insert the cartridge smoothly,
you may have the wrong cartridge. Check the
package and product code. If the ink light remains
on after installing the cartridge, try removing and
then reinserting it.
Replacing Printer Parts
Replacing Printer Parts

Replacing the Cutter Blade

If you notice that the paper isn't cut cleanly, you may need
to replace the cutter blade (part # C12C815291). You can
check its status as described below:
1
Press the Menu button on the printer, then press the
button until you see PRINTER STATUS.
2
Press Menu, then press the button until you see
SERVICE LIFE.
3
Press the Menu button, then press the button until
you see CUTTER. E*****F indicates a new cutter. If
no stars are displayed, the cutter needs to be replaced.
Caution:
Do not use the cutter for the
following media:
•
Fine art paper (such as Epson UltraSmooth
Textured, or Velvet)
•
Canvas
•
Vinyl
•
Matte board
•
Heavyweight polyester banner media
6
Return the ink lever to its locked position.
7
If you're using 110 ml cartridges, close the ink
compartment cover. If you're using 220 ml
cartridges, you'll have to leave the cover open.
Follow these steps to replace the cutter:
1
Press the Menu button on the printer, then press
the button until you see CUTTER REPLACE.
2
Press the Menu button to display EXEC, then press
the Menu button again. The print head moves to the
cutter replacement position.
3
Open the top cover.
,
®
6
Continue