3Com AP2750 Schnellstart-Handbuch - Seite 5
Blättern Sie online oder laden Sie pdf Schnellstart-Handbuch für Drahtloser Zugangspunkt 3Com AP2750 herunter. 3Com AP2750 14 Seiten. Wireless lan managed
Auch für 3Com AP2750: Schnellstart-Handbuch (9 seiten), Schnellstart-Handbuch (17 seiten), Handbuch (4 seiten)
Seite drucken
The figures below show the mounting bracket being mounted to a wall, and then a cable
being routed through the large opening on the back of the mounting bracket.
C radle
Installing the mounting bracket
4
Connect the Ethernet cable (and power cable, if applicable) to the port(s) on the
front of the access point.
5
Snap the access point onto the mounting bracket.
To install the locking bar, push the locking bar through the opening in the side of the
mounting bracket until the hole on the locking bar is exposed. Insert a lock (not provided)
through the hole on the locking bar, and then close the lock to secure it in place.
Inserting the locking bar
Routing a cable
Securing the bar with a lock
5