3Com AP2750 Panduan Memulai Cepat - Halaman 5

Jelajahi secara online atau unduh pdf Panduan Memulai Cepat untuk Titik Akses Nirkabel 3Com AP2750. 3Com AP2750 14 halaman. Wireless lan managed
Juga untuk 3Com AP2750: Panduan Memulai Cepat (9 halaman), Panduan Memulai Cepat (17 halaman), Manual (4 halaman)

Halaman Cetak

The figures below show the mounting bracket being mounted to a wall, and then a cable

being routed through the large opening on the back of the mounting bracket.

C radle

Installing the mounting bracket

Connect the Ethernet cable (and power cable, if applicable) to the port(s) on the

front of the access point.

Snap the access point onto the mounting bracket.

To install the locking bar, push the locking bar through the opening in the side of the

mounting bracket until the hole on the locking bar is exposed. Insert a lock (not provided)

through the hole on the locking bar, and then close the lock to secure it in place.

Inserting the locking bar

Routing a cable

Securing the bar with a lock