Pioneer NC-50DAB Gebrauchsanweisung - Seite 37

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Auto-Empfänger Pioneer NC-50DAB herunter. Pioneer NC-50DAB 42 Seiten. Network cd receiver

Seite drucken

> Before Start

> Part Names

Cannot play discs

0 Place the disc in the disc tray so the label is facing up.

0 Play may not be possible if the disc is scratched or dirty.

Cannot Play USB storage device / HDD

0 Check whether the USB storage device or USB cable is

correctly inserted to the USB port of the unit.

0 Disconnect the USB storage device from the unit, and

then try reconnecting.

0 This unit may not recognize USB storage devices and

HDDs as proper devices sometimes. Try switching this

unit to standby and then turning it on again.

0 Depending on the type of format, the playback may not

be performed normally. Check the type of the file formats

that is supported. (

P15)

0 Cautions regarding USB and HDD devices (

FM reception is poor

0 Re-check the antenna connection.

0 Separate the antenna from speaker cables and the

power cord.

0 Move the unit away from your TV or PC.

0 Passing cars and airplanes can cause interference.

0 Concrete walls weaken radio signals.

0 FM reception may become clearer if you use the antenna

jack on the wall used for the TV.

0 FM reception improves if the Tuning Mode (

to Manual. However, reception will be monaural rather

than stereo.

Network function

0 If you cannot select a network service, it will become

selectable when the network function is started.

0 Try plugging/unplugging the power supply of this unit and

> Install

> Initial Setup

the router, and try rebooting the router.

Cannot access the Internet radio

0 Certain network service or contents available through the

unit may not be accessible in case the service provider

terminates its service.

0 Make sure that your modem and router are properly

connected, and make sure they are both turned on.

0 Depending on ISP, setting the proxy server is necessary.

0 Make sure that the used router and/or modem is

supported by your ISP.

Cannot access the network server

0 This unit needs to be connected to the same router as

the network server.

0 This unit is compatible with Windows Media

12 network servers or NAS that are compatible with

home network functionality. Furthermore, when using a

P15)

PC, only music files registered in the Windows Media

Player library can be played.

Playback stops while listening to music files on the

network server

0 When the PC is serving as the network server, try quitting

any application software other than the server software

(Windows Media

Player 12, etc.).

0 If the PC is downloading or copying large files, the

playback may be interrupted.

The album names and artist names for the Music Server

are not displayed

P32) is set

0 Meta data, such as album names and artist names,

needs to be recognized on the server for distribution to

this unit, so this depends on the specifications of the NAS

or server you are using.

0 The file formats supported depend on the NAS or server

software. For details, contact the manufacturer of NAS or

the server software.

Album art in Music Server is displayed sometimes but

> Playback

Advanced Setup | Firmware Update |

not other times

0 Music Server depends on the specifications of the server

software.

0 The formats supported depend on the server software.

0 For details, contact the manufacturer of the server

software.

BLUETOOTH function

0 Try plugging/unplugging the power of the unit and try

turning on/off the BLUETOOTH enabled device.

Restarting the BLUETOOTH enabled device may be

effective.

0 The BLUETOOTH enabled devices must support the

A2DP profile.

Player 11 or

0 Near components such as microwave oven or cordless

phone, which use the radio wave in the 2.4 GHz range, a

radio wave interference may occur, which disables the

use of this unit.

0 If there is a metallic object near the unit, BLUETOOTH

connection may not be possible as the metal can effect

on the radio waves.

0 In order to respond to operations on the remote controller

of this unit, the BLUETOOTH enabled device must

support the AVRCP profile.

0 Note that operation with the remote controller is not

always guaranteed with all BLUETOOTH enabled

devices.

Cannot connect with this unit

0 Check that the BLUETOOTH function of the

BLUETOOTH enabled device is enabled.

0 If an already paired unit cannot be connected, delete the

pairing information on the BLUETOOTH enabled device,

then pair again.

Music playback is unavailable on the unit even after

successful BLUETOOTH connection

0 When the audio volume of your BLUETOOTH enabled

Others