Pioneer DCS-370 Betriebsanleitung - Seite 42

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Empfänger Pioneer DCS-370 herunter. Pioneer DCS-370 48 Seiten. Pioneer dvd receiver operating instructions

Seite drucken

Additional information

DVD/CD/Video CD player

Problem

The disc is ejected

automatically after

Playback not possible.

Picture playback stops

and buttons cannot be

used.

Settings are canceled.

No picture/No color.

Screen is stretched or

aspect doesn't change.

When recorded on a

VCR or passed through

an AV selector, there is

disturbance in the

playback picture.

Picture disturbance

during playback or dark.

Noticeable difference in

DVD and CD volume.

CD-ROM disc is not

recognized.

DVD-ROM disc is not

recognized.

Files don't show up in

the Disc Navigator/

Photo Browser.

Can't play WMA or

MPEG-4 AAC files.

Remedy

• Clean the disc and align the disc properly in the disc guide.

• If the region number on a DVD-video disc does not match the number on the

player, the disc cannot be used (see DVD Video regions on page 39). In this

instance, one of the following messages appears on screen: Incompatible disc

region number/Can't play disc.

• Allow time for any condensation inside the player to evaporate. Avoid using the

player near an air-conditioning unit.

• If the disc is loaded upside down, reload the disc with label side face up.

• Press  (stop), then  (play) to start playback again.

• Switch the power off once, then on again using the front panel

 STANDBY/ON button.

• When the power is cut, settings will be canceled.

• Check that connections are correct and that plugs are inserted fully.

• Check the manual of the TV/monitor to make sure the settings are correct.

• The TV Screen setting is incorrect. Set the TV Screen option to match the TV/

monitor you're using (see Video Output settings on page 27).

• This system uses copy-protection technology which may prevent recording or

cause picture problems when connected through a VCR or AV selector. This is not

a malfunction.

• This player is compatible with Macro-Vision System copy guard. Some discs

include a copy prevention signal, and when this type of disc is played back, stripes

etc., may appear on some sections of the picture depending on the TV. This is not a

malfunction.

• Discs respond differently to particular player functions. This may result in the

screen becoming black for a brief instant or shaking slightly when the function is

executed. These problems are largely due to differences between discs and disc

content and are not malfunctions of this player.

• DVDs and CDs use different recording methods. This is not a malfunction.

• Make sure that the CD-ROM was recorded using the ISO 9660 disc format. See

Disc compatibility table on page 36 for more on disc compatibility.

• Make sure that the DVD-ROM was recorded using the UDF bridge format. See

Disc compatibility table on page 36 for more on disc compatibility.

• The files on the disc must be named with the correct file extension: .mp3 for MP3

files; .wma for WMA files; .m4a for MPEG-4 AAC files; .jpg for JPEG files (upper or

lower-case is OK). See Disc compatibility table on page 36.

• The files were recorded using DRM (digital rights management). This is not a

malfunction.