Pioneer A-656 Betriebsanleitung - Seite 10

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer A-656 herunter. Pioneer A-656 13 Seiten.
Auch für Pioneer A-656: Betriebsanleitung (14 seiten)

Seite drucken

Incorrect operations are often mistake

dealer to carry out repair work.

Symptom

Probable Cause

Remedy

No power supplied to unit

Power plug is disconnected from outlet.

Insert plug securely in outlet.

Turn on power to the other component.

No sound

Connecting

cords

are

disconnected

from

terminals, or connected incorrectly.

Terminals, or connecting cords pin plugs are

dirty.

The INPUT SELECTOR

or ADPT

1/TAPE

switch

selected

does

not

match

the

component being played back.

Operation of other components is incorrect.

The

SPEAKERS

selector switch

is set to

"OFF".

The PHONO EQ switch is OFF position

(When listening PHONO in A-757.)

Shorting bars are not inserted into the ADPT 2

terminals.

Connect securely.

Clean terminals and plugs.

Set switches correctly (PHONO, TUNER, CD,

LINE, DAT/TAPE 1, TAPE 2). Set the ADPT

1/TAPE 3 to OFF.

Set the switch to A, B or

A+B.

Set PHONO EQ switch to ON position.

Insert the shorting bars properly.

No sound from one speaker

Connecting

cords

speaker

cords

are

disconnected on that side.

BALANCE contro! has been adjusted to one

side.

Connect securely.

Adjust BALANCE control to center position.

an't record tapes

The position of the REC SELECTOR switch is

incorrect.

Connections are incorrect.

Operation of tape deck is incorrect.

Set switch correctly.

(See section RECORDING TAPES).

Reconnect cords properly.

Consult the operating instructions for the tape

deck,

Can't perform tape copying

The position of the REC SELECTOR switch is

incorrect.

Operation of tape decks is incorrect.

Set switch correctly

(See section COPYING TAPES).

Consult the operating instructions for the tape

decks.

POWER-CORD CAUTION

Handle the power cord by the piug. Do not pull out the plug by tugging

the cord and never touch the power cord when your hands are wet as

this could cause a short circuit or electric shock. Do not place the unit,

apiece of furniture, etc., on the power cord, or pinch the cord. Never

make a knot in the cord or tie it with other cords. The power cords

should be routed such that they are not likely to be stepped on. A

damaged power cord can cause fire or give you an electrical shock.

Check the power cord once in a while. When you find it damaged, ask

your nearest PIONEER authorized service center or your dealer for a

replacement.