Pioneer A-656 Manual de instrucciones - Página 10
Navegue en línea o descargue pdf Manual de instrucciones para Amplificador Pioneer A-656. Pioneer A-656 13 páginas.
También para Pioneer A-656: Manual de instrucciones (14 páginas)
Imprimir página
Incorrect operations are often mistake
dealer to carry out repair work.
Symptom
4
Probable Cause
Remedy
No power supplied to unit
Power plug is disconnected from outlet.
i
Insert plug securely in outlet.
Turn on power to the other component.
No sound
Connecting
cords
are
disconnected
from
terminals, or connected incorrectly.
Terminals, or connecting cords pin plugs are
dirty.
The INPUT SELECTOR
or ADPT
1/TAPE
3
switch
selected
does
not
match
the
component being played back.
Operation of other components is incorrect.
The
SPEAKERS
selector switch
is set to
"OFF".
:
The PHONO EQ switch is OFF position
(When listening PHONO in A-757.)
Shorting bars are not inserted into the ADPT 2
terminals.
Connect securely.
Clean terminals and plugs.
Set switches correctly (PHONO, TUNER, CD,
LINE, DAT/TAPE 1, TAPE 2). Set the ADPT
1/TAPE 3 to OFF.
Set the switch to A, B or
A+B.
Set PHONO EQ switch to ON position.
Insert the shorting bars properly.
|
No sound from one speaker
Connecting
cords
or
speaker
cords
are
disconnected on that side.
BALANCE contro! has been adjusted to one
side.
Connect securely.
Adjust BALANCE control to center position.
fe
an't record tapes
The position of the REC SELECTOR switch is
incorrect.
Connections are incorrect.
Operation of tape deck is incorrect.
Set switch correctly.
(See section RECORDING TAPES).
Reconnect cords properly.
Consult the operating instructions for the tape
deck,
Can't perform tape copying
The position of the REC SELECTOR switch is
incorrect.
Operation of tape decks is incorrect.
Set switch correctly
(See section COPYING TAPES).
Consult the operating instructions for the tape
decks.
POWER-CORD CAUTION
Handle the power cord by the piug. Do not pull out the plug by tugging
the cord and never touch the power cord when your hands are wet as
this could cause a short circuit or electric shock. Do not place the unit,
apiece of furniture, etc., on the power cord, or pinch the cord. Never
make a knot in the cord or tie it with other cords. The power cords
should be routed such that they are not likely to be stepped on. A
damaged power cord can cause fire or give you an electrical shock.
Check the power cord once in a while. When you find it damaged, ask
your nearest PIONEER authorized service center or your dealer for a
replacement.
10
<ARB1175>
E