Pioneer ND-G500 - Amplifier Service-Handbuch - Seite 10
Blättern Sie online oder laden Sie pdf Service-Handbuch für Verstärken Pioneer ND-G500 - Amplifier herunter. Pioneer ND-G500 - Amplifier 26 Seiten. 4-channel gateway amplifier
Auch für Pioneer ND-G500 - Amplifier: Benutzerhandbuch (44 seiten), Benutzerhandbuch (7 seiten), Anweisungen (4 seiten)
Seite drucken
1
7. DISASSEMBLY
(Caution)
1) Approximately one hour after activating, the temperature on part of outer surface reaches
A
nearly 70
o
C. Therefore, be careful not to get burn, immediately after turning off power.
2) Watch out for a hot heat sink.
Operations while removing a heat sink can cause failure.
3) As a heat sink (approx. 250 g to 300 g) is heavy comparing with the product weight (approx.
900 g). Keep a balance when taking out the board.
Removing the Case (Fig.1)
1
Remove the eight screws and then remove
the Case.
B
C
Removing the Amp Unit (Fig.2)
1
Remove the six screws and then separate
the Heat Sink and the Chassis.
D
2
Remove the five screws and then remove
the Amp Unit.
(Note)
While fixing a heat sink to a chassis, Amp
E
Unit cannot be removed. Meanwhile, even
if screws are taken out, the heat sink is not
removed from the chassis.
(The heat sink is removed together with
Amp Unit. They cannot be removed
separately.)
F
10
1
2
ND-G500/XS/E5
1
1
1
Heat Sink
1
1
Chassis
2
ND-G500/XS/E5
2
3
Case
1
1
1
1
Chassis
Heat Sink
2
2
Amp Unit
3
4
1
1
1
Fig.1
1
1
2
2
Fig.2
4