Pioneer ND-G500 - Amplifier Руководство по эксплуатации - Страница 10
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Усилитель Pioneer ND-G500 - Amplifier. Pioneer ND-G500 - Amplifier 26 страниц. 4-channel gateway amplifier
Также для Pioneer ND-G500 - Amplifier: Руководство пользователя (44 страниц), Руководство пользователя (7 страниц), Инструкции (4 страниц)
Печатать страницу
1
7. DISASSEMBLY
(Caution)
1) Approximately one hour after activating, the temperature on part of outer surface reaches
A
nearly 70
o
C. Therefore, be careful not to get burn, immediately after turning off power.
2) Watch out for a hot heat sink.
Operations while removing a heat sink can cause failure.
3) As a heat sink (approx. 250 g to 300 g) is heavy comparing with the product weight (approx.
900 g). Keep a balance when taking out the board.
Removing the Case (Fig.1)
1
Remove the eight screws and then remove
the Case.
B
C
Removing the Amp Unit (Fig.2)
1
Remove the six screws and then separate
the Heat Sink and the Chassis.
D
2
Remove the five screws and then remove
the Amp Unit.
(Note)
While fixing a heat sink to a chassis, Amp
E
Unit cannot be removed. Meanwhile, even
if screws are taken out, the heat sink is not
removed from the chassis.
(The heat sink is removed together with
Amp Unit. They cannot be removed
separately.)
F
10
1
2
ND-G500/XS/E5
1
1
1
Heat Sink
1
1
Chassis
2
ND-G500/XS/E5
2
3
Case
1
1
1
1
Chassis
Heat Sink
2
2
Amp Unit
3
4
1
1
1
Fig.1
1
1
2
2
Fig.2
4