Pioneer VSA-1000 Betriebsanleitung - Seite 7

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer VSA-1000 herunter. Pioneer VSA-1000 35 Seiten. Av digital surround amplifier
Auch für Pioneer VSA-1000: Betriebsanleitung (35 seiten)

Seite drucken

FRONT PANEL FACILITIES

@) POWER

STANDBY/ON

switch/indicator

(2) SPEAKER switches/indicators

FRONT A, B:

Switches and indicates for the front speaker systems A, B.

REAR:

Switches and indicates for the rear speaker systems.

CENTER:

@) BASS control switches

Use to adjust the low-frequency level. Press the + switch to increase

low-frequency level, and the — switch to decrease it.

(4) TREBLE control switches

Use to adjust the high-frequency level. Press the + switch to increase

high-frequency level, and the — switch to decrease it.

When

both

sides

(+,

—)

of the

TREBLE

control

are

pressed

simultaneously,

the treble response

will be set to the flat (normal)

condition.

Five types of tone (bass and treble) control settings can be preset.

MEMORY:

;

Press this switch to store in memory.

SELECT:

Tone setting changes as follows when pressing this switch repeatedly:

Dee

eee

-» Memory A

Memory E~

Memory D~t-Memory

C~~ Memory 5

FLAT:

Flat tone characteristics.

LOUDNESS:

Low and high frequencies are emphasized.

Use this setting to

obtain a full-bodied sound when listening.

Presetting the acoustic memory

1. Adjust the sound quality as desired using the BASS and TREBLE

control switches.

2. Press the MEMORY

switch.

3. Press the SELECT switch and select the sign to which you wish

to assign the setting (A — E) while the indicator flashes.

¢ When

the indicator lights after flashing,

it indicates

that the

command

has been stored in memory.

If you don't select memory

positions

{A —

E) while the ACOUSTIC

indicator is flashing,

nothing will be stored in memory.

paper

rao

nome cient

EARP

SS Oem

e In this way, the desired tone will be preset in one of the five

acoustic memory

positions. To preset four other desired tone

settings, perform the same operations.

to select the desired memory position.

NOTE:

e Even if the power switch is in the

STANDBY

position, provided the

power cord is plugged into an AC wail socket, memory will not be

erased. Even if the power cord /s disconnected, memory will remain

for about 2 weeks.

° /f the memory is erased, program the presets once more.

(6) REMOTE SENSOR window

Display section

@) This lights when the front and rear balance and the rear and center

volume levels are being adjusted.

During volume adjustment (8) and (€) display the level, and during

balance adjustment 'B) displays the balance.

@) This gives alphanumeric display of the component selected by the

INPUT SELECTOR.

When adjusting front and rear balance and volume or center volume,

this displays balance and volume level.

It also gives alphanumeric display of SLEEP when the sleep timer is

operating, and alphanumeric display of TEST when the DOLBY PRO

LOGIC SURROUND

tone is ON.

©) This lights when the VIDEO ADAPTOR

switch is ON.

(D) This lights when the TAPE 2/DAT 2 monitor is ON.

(E) Displays the SOUND

FIELD MEMORY

selection.

During center or rear volume level adjustment, the volume level is

displayed.

The time

remaining

when

the SLEEP

TIMER

is operating

is also

displayed.

(F) In any mode other than DOLBY

PRO LOGIC

SURROUND,

if the

CENTER MONO

OUT switch is pressed, this lights.

@) Displays the DOLBY

PRO LOGIC CENTER

MODE.

(H) Displays the TREBLE and BASS adjustment settings.

(D Displays the selected ACOUSTIC MEMORY.

(J) Lights when the VCR MONO switch is ON.

'K) Displays the currently selected video signal.

It also displays the video functions. If the VIDEO SELECT switch is

pressed it changes.

(Lb) Displays the component selected by the VCR

1 RECORDING

SELECTOR

(A component that can record to VCR

1).

M) Lights when the VCR NOISE FILTER switch is ON.

(N) Displays the selected DELAY TIME.

(8) SURROUND

MODE

switches/indicators

Select the source to be used when employing the SURROUND function.

OFF:

To cancel the surround function.

STUDIO:

Enjoy the atmosphere of listening to music in a recording studio.

STADIUM:

Ideal for sports broadcasts, etc.

SIMULATED

SURROUND:

Gives concert-hall presence to monaural sound (AM, TV, etc.).

DOLBY PRO LOGIC SURROUND:

Select this setting when watching video tapes or video discs bearing

the 9

[DOLBY SURROUND] mark.