Pioneer VSA-1000 Betriebsanleitung - Seite 8

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Verstärken Pioneer VSA-1000 herunter. Pioneer VSA-1000 35 Seiten. Av digital surround amplifier
Auch für Pioneer VSA-1000: Betriebsanleitung (35 seiten)

Seite drucken

FRONT PANEL FACILITIES

(8) SOUND FIELD MEMORY

switches

(MEMORY, SELECT)

In the SOUND

FIELD MEMORY:

e SURROUND

MODE

e CENTER MODE

(In the case of DOLBY PRO LOGIC SURROUND.

other cases the CENTER

MONO

OUT ON/OFF)

® FRONT balance

@ CENTER volume level

® REAR balance

® REAR volume level

e ACOUSTIC

MEMORY

Up to five of these positions can be stored in memory. It is also possible

to select positions previously stored in the memory (''P"' is displayed)

(Contents of ''P'']

e SURROUND

MODE:

DOLBY SURROUND

e CENTER MODE:

NORMAL

e DELAY TIME: 20 ms

@ FRONT, REAR balance: CENTER

REAR, CENTER volume level: both — 14 dB

ACOUSTIC:

FLAT

HOW TO USE THE SOUND

FIELD MEMORY

1. Select ACOUSTIC MEMORY, SURROUND MODE, and adjust the

DELAY TIME, balance and volume level.

2. Press the MEMORY

switch.

3. While the indicator is flashing, use the SELECT switch to select

the position (A — E) to be memorized.

* A position is memorized

when

the SOUND

FIELD MEMORY

indicator stops flashing and lights. If the position to be memorized

(A — E) is not selected while the indicator is flashing, it will not

be memorized.

« TONE settings not stored in ACOUSTIC

MEMORY

will not be

memorized.

* One of the five possible positions has now been stored in memory.

The four remaining positions can be stored in memory using the

same procedure.

¢ When recalling the contents of the memory, select the memorized

position with the SELECT switch.

* In ''P'' nothing can be memorized.

CENTER LEVEL switches

For adjustment of the center level when the SURROUND

MODE is in

the DOLBY PRO LOGIC SURROUND or when the CENTER MONO OUT

is ON.

Press + to raise the volume,

— to lower. If + and — are pressed at

the same time, you will return to the initial volume level (— 14 dB).

(7) REAR LEVEL switches

When in the SURROUND

MODE, these adjust the rear level.

Press + to raise the volume, — to lower. Press + and — at the same

time to return to the initial volume

level (— 14 dB). This can't be

performed when the SURROUND

MODE is OFF.

2) MUTING switch/indicator

Press to temporarily cut off the sound volume. The indicator will flash.

When pressed again, the sound will return to its previous level.

(3) MASTER VOLUME control

Adjusts the volume level.

The front, rear, and center levels change at the same time.

CENTER MODE switch

Selects the DOLBY

PRO LOGIC SURROUND

CENTER

MODE

(OFF,

NORMAL, WIDE, PHANTOM) setting. This can only be performed when

the DOLBY PRO LOGIC SURROUND

is ON.

(5) TEST TONE switch

This only operates when DOLBY

PRO LOGIC SURROUND

is used.

This switches the TEST TONE output ON/OFF to adjust the SURROUND

BALANCE

of the DOLBY PRO LOGIC SURROUND.

In the ON position the TEST TONE passes from the front left

center

—

front right >

rear

{L, R) in that order,

and

can

be heard

for

approximately 2 seconds from each speaker.

DELAY TIME switch

Switches the surround delay time in three steps.

een

ms -» 30 (eal

This does not operate when the SURROUND

MODE

is OFF or when

STUDIO is used.

@?) BALANCE switches

Use to adjust the sound volume balance between left and right speakers.

L: Press to decrease the sound on the right side.

R: Press to decrease the sound on the left side.

Press L and R together to bring the volume 'balance back to center.

in the surround mode, these affect the front and rear speaker volume

at the same time.

PHONES jack

Connect the plug on your headphones to this jack. To listen to a program

through

the headphones,

set all SPEAKERS

switches

to the OFF

position.

G3) SLEEP switch

Sets the sleep timer. Each time you press this key, the setting changes

as shown here.

[eet

90 minutes

—--—-

Approx. 60 minutes

OFF ~¢

Approx. 30 ini

@0) CENTER MONO

OUT switch

This switches monaural (L + R) center speaker output on and off.

(This switch cannot be used with DOLBY PRO LOGIC SURROUND)

NOTE:

Tone control doesn't operate with CENTER MONO

OUT.

@i) VIDEO SELECT switch

Press this to switch VIDEO OUT (TO MONITOR TV) and VCR OUT in

the following sequence:

(Audio doesn't change)

The recording selector has priority for VCR

1 video recording.

1——-* VCR

2 ——* VCR 3 ———> VDP

——

OFF «—————-

VIDEO 2<----—

VIDEO. ia

The display indicator lights to show the selected item.

REC SEL SOURCE switch

The VCR 1 REC SELECT indicator goes out when this switch is turned

on. The picture and sound to be recorded by VCR 1 is selected by the

input selector.