Pioneer CLD-DS04 Betriebsanleitung - Seite 12
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CLD-DS04 herunter. Pioneer CLD-DS04 30 Seiten. Cd cdv ld player
I BASIC OPERATION (PLAYBACK OF A DISC)
•
For the connections,
refer to pages 8 and 9.
3
2
4
i ....o L
1 ......__
[
1
i
o
o
I
'1J
1
The buttons with the same name on the front panel and remote
control unit have the same functions.
•
The STANDBY indicator is lit while the power is OFF.
1. Press POWER.
Set the TV to the function
(input) to which
the player is
connected.
Front Panel
POWER
POWER
2. Press appropriate
OPEN/CLOSE to open the
disc table.
To play an LD
To play a CD
Front Panel
OPEN
/CLOSE
t-r-1
Front Panel
•
After using a CD, the CD tray opens when you press OPEN/
CLOSE on the remote control unit. To playback an LD, use
OPEN/CLOSE on the front panel.
3. Place a disc on the disc table.
To place an LD
To place a CD
•
Place only one disc, LD or CD, at a time.
4. Press _-.
•
Playback of the CDV starts with the video part.
STOP
Operations
marked
with
[ _ ] are made
from
the
remote
control
unit.
12
Disc placing position
The CD/CDV or single-sided
LD should be placed with the label
side facing up and the double-sided
LD should
be placed so that
the label of the side to be played faces up. Place any disc correctly
along the guide groove provided for each size.
LD disc table :
(_
CD single: 8 cm (3 in.)
CD, CDV, video single: 12 cm (5 in,)
LD, LD single: 20 cm (8 in.)
LD: 30 cm (12 in,)
CD disc table :
le: 8 cm (3 in.)
CD, CDV, video single:
12 cm (5 in.)
r- Caution in placing a disc
l
Be careful not to deviate a disc from the guide groove on the
disc table, for this will make proper playback impossible and
could cause a malfunction
such as disc damage.
For safety!
1
•
Be careful not to catch your finger in the disc table when it
draws in. Also take care to prevent a small child from opening
the disc table cover and inserting
their hand inside the player to
prevent injury.
•
Do not place an object other than a disc on the disc table.
Convenient feature (Auto power-ON function)
•
When the power is OFF, pressing
OPEN/CLOSE
turns on the
power
automatically
and opens the disc table.
•
When you have turned the power OFF with a disc left inside
the player, simply press I_ on the front panel; the power turns
ON automatically
and playback of the disc starts.
•
The above features cannot be operated with the remote control
unit.
Playback by specifying side A or B
In this description,
side A refers to the surface facing up when the
disc is placed on the disc table, and side B refers to the other side.
Note that they are not always the same as disc sides A and B as
recorded on the disc,
It is recommended
to place • disc so that the side labeled
"SIDE A" faces upward.
To play side A only; When the disc with the side labeled "SIDE
A" is facing
up, press DISC SIDE A without pressing
I_ The
player will stop after having played side A. To play side B only;
Press DiSC SIDE B without
pressing I_ . The player will stop after
having played side B.
If the disc has been placed with the labeled "SIDE B" facing up,
DiSC SiDE A plays side B and DISC SiDE B plays side A.
Display
when
the disc side is switched
•
Turning from side A
•
Turning from side. B to
to side B
side A
'
A
B
<VRB1147>