Pioneer CLD-DS04 Betriebsanleitung - Seite 20
Blättern Sie online oder laden Sie pdf Betriebsanleitung für CD-Spieler Pioneer CLD-DS04 herunter. Pioneer CLD-DS04 30 Seiten. Cd cdv ld player
Seite drucken
PROGRAMMED
PLAYBACK (PLAYING CHAPTER/TRACKS
BY
CHANGING
THEIR ORDER AS REQUIRED)
Desired chapters
(LD) or tracks (CDV/CD) can be programmed
to
be played in a desired
order.
Up to 24 chapters/tracks
can be
programmed
at a time.
•
Programming
operation
can be made easier by observing
the
on-screen display or display window
during operation.
1. Press PGM.
PGM
2. Select
the chapters
or tracks
to be pro-
grammed.
<With
a double-sided
LD>
Example
Programming
chapter
9 on side B, chapter
7
on side A and then
chapter
18 on side B
(_
Select
side A or B.
D
@
Specify
the
chapter
number.
• Program the next chapter by repeating steps (_) and
@ above.
A
_
D r-q-. D
<With
a single-sided
LD, CD or CDV>
Example
' Programming
CD tracks
9, 7, and then 18
•
Press numeric
buttons
9, 7, +10 then 8.
If you press a wrong numeric button :
Press CLEAR, then press correct numeric button(s).
3. Press _.
PLAY
Programmed
playback
starts
after searching
the first pro-
grammed
track/chapter.
In the examples
above,
the pro-
grammed
playback
starts from
chapter/track
No. 9. When
chapter/track
Nos.
9, 7, and then
18 have been
played,
the player
enters
stop mode.
[
Programming
of pause
J
Programming pauses together with chapter/track numbers is very
convenient for recording the programmed
playback.
•
In case of recording the programmed playback on two sides of
an audio tape, it is recommended
to program a pause after the
last chapter/track
to be recorded
on the first side of the tape.
This makes it possible to flip the tape while playback is paused
and avoid making a recording mistake.
•
While programmed
playback is paused, it is possible to record a
narration
or create e non-recorded
blank. Pressing II in pause
mode resumes programmed
playback so that recording can be
restarted.
•
It is not possible
to record a pause as the final step of the
program.
I
Indication of programmed
pause
I
"11" appears on the TV screen
and "PA" appears
on the display
window.
I
To checkthe
programmed
contents
I
When PGM is pressed during or after programmed
playback,
the
programmed
contents
can be displayed on the TV screen. Press-
ing PGM again turns off the display of the programmed
contents.
[ To modify programmed
content
]
To delete a programmed
chapter number, track number or pause :
1. Press PGM.
2. Press either _
or t_< to move _ (the cursor) to the chap-
ter number, track number or pause to be modified.
If you want to replace that content,
press the numeric button. If
you want to program a pause, press I1.
If you want to clear the content, press CLEAR.
3. Press PGM to complete.
If you press _ in place of PGM, programmed
playback starts
from the first programmed
chapter or track.
•
It is not possible to replace or clear the chapter or track being
played.
[
To clear the entire program
I
•
Open the disc table.
•
Press CLEAR in stop mode.
•
When CLEAR is pressed during playback, the programmed
play-
back is canceled and norma_ playback starts. Pressing CLEAR
again also clears the programmed contents.
20
<VRB1147>