Pioneer PDP-4214HD Betriebsanleitung - Seite 22

Blättern Sie online oder laden Sie pdf Betriebsanleitung für Monitor Pioneer PDP-4214HD herunter. Pioneer PDP-4214HD 47 Seiten. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Auch für Pioneer PDP-4214HD: Schnellreferenz-Teilelisten (12 seiten)

Seite drucken

Basic Operations

Setting MTS/SAP mode

When watching conventional TV programs, you may enjoy

stereo sound and/or Secondary Audio Programs (SAP), using

the Multi-channel Television Sound (MTS) function.

• Stereo broadcasts

You can enjoy, for example, sports, shows, and concerts in

dynamic stereo sound.

• SAP broadcasts

MAIN sound: The normal program soundtrack (either in mono

or stereo).

SAP sound: Listen to second language, supplementary com-

mentary and other information. (SAP is mono sound.)

• Conventional TV programs in this manual designate TV channels that

are received through the conventional VHF/UHF frequencies or

conventional cable TV channels.

• When stereo sound is difficult to hear, you can manually switch to

the MONO mode to obtain clearer sound.

• Once the MONO mode is selected, the Plasma Display sound

remains mono even if the Plasma Display receives a stereo broad-

cast. You must reselect the STEREO mode if you want to hear stereo

sound again.

• Selecting MTS while the input source is in VIDEO, S-VIDEO, COMPO-

NENT and HDMI does not change the type of the sound. In this case,

the sound is determined by the video source.

SPLIT

DTV

SIGNAL

Each time you press the MTS button, MTS toggles as shown

below.

STEREO mode

STEREO

• In each of the MTS/SAP modes selected using the MTS button, the

display changes depending on broadcasting signals being received.

07-PDP42A3HD-Eng (19-23)

SPLIT

P IN P

SWAP

INPUT

SHIFT

SPLIT

CH+

CH–

DELETE

MTS

LIST

SAP mode

MONO mode

SAP

MONO

Using the multiscreen functions

You can display a sub-picture within the main picture. In this

way you can watch a TV program or monitor the video input

from any connected device while watching TV or another video

input.

Use this function following the procedures below to select the

Twin (2-screen) or PIP (picture in picture) mode.

• In the multiscreen function, the sound of a main input is always

output.

PIP (picture in picture)

Main input

Twin 1 (2-screen)

Main input

Twin 2 (2-screen)

Main input

Press the MENU button.

Press the c or d button to move to Screen, then press

the \ or OK button.

Press the c or d button to move to PIP/TWIN, then

press the \ or OK button.

Screen

Screen Size

Auto

Main Input

Analog TV

PIP/TWIN

Screen Saver

Move

Adjust

Return

05.4.20, 4:30 PM

Sub-picture