Pioneer PDP-4214HD Operating Instructions Manual - Page 22
Browse online or download pdf Operating Instructions Manual for Monitor Pioneer PDP-4214HD. Pioneer PDP-4214HD 47 pages. Pioneer 3rd, 4th % 5th generations plasma panel quick reference parts lists
Also for Pioneer PDP-4214HD: Quick Reference Parts Lists (12 pages)
Print Page
06
Basic Operations
Setting MTS/SAP mode
When watching conventional TV programs, you may enjoy
stereo sound and/or Secondary Audio Programs (SAP), using
the Multi-channel Television Sound (MTS) function.
• Stereo broadcasts
You can enjoy, for example, sports, shows, and concerts in
dynamic stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in mono
or stereo).
SAP sound: Listen to second language, supplementary com-
mentary and other information. (SAP is mono sound.)
• Conventional TV programs in this manual designate TV channels that
are received through the conventional VHF/UHF frequencies or
conventional cable TV channels.
• When stereo sound is difficult to hear, you can manually switch to
the MONO mode to obtain clearer sound.
• Once the MONO mode is selected, the Plasma Display sound
remains mono even if the Plasma Display receives a stereo broad-
cast. You must reselect the STEREO mode if you want to hear stereo
sound again.
• Selecting MTS while the input source is in VIDEO, S-VIDEO, COMPO-
NENT and HDMI does not change the type of the sound. In this case,
the sound is determined by the video source.
SPLIT
DTV
SIGNAL
Each time you press the MTS button, MTS toggles as shown
below.
STEREO mode
STEREO
• In each of the MTS/SAP modes selected using the MTS button, the
display changes depending on broadcasting signals being received.
22
En
07-PDP42A3HD-Eng (19-23)
SPLIT
P IN P
SWAP
INPUT
SHIFT
SPLIT
SPLIT
CH+
CH–
CH
DELETE
MTS
LIST
SAP mode
MONO mode
SAP
SAP
MONO
MONO
22
Using the multiscreen functions
You can display a sub-picture within the main picture. In this
way you can watch a TV program or monitor the video input
from any connected device while watching TV or another video
input.
Use this function following the procedures below to select the
Twin (2-screen) or PIP (picture in picture) mode.
• In the multiscreen function, the sound of a main input is always
output.
PIP (picture in picture)
Main input
Twin 1 (2-screen)
Main input
Twin 2 (2-screen)
Main input
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the \ or OK button.
3
Press the c or d button to move to PIP/TWIN, then
press the \ or OK button.
Screen
Screen Size
Auto
Main Input
Analog TV
PIP/TWIN
Screen Saver
Move
Adjust
Return
05.4.20, 4:30 PM
Sub-picture
Sub-picture
Sub-picture