Ariston FM 53 F (ALU) Kurzanleitung - Seite 6
Blättern Sie online oder laden Sie pdf Kurzanleitung für Backofen Ariston FM 53 F (ALU) herunter. Ariston FM 53 F (ALU) 8 Seiten.
Technical instructions for installation and adjustment.
for the sole use of specialised installers
The instructions which follow are to help the qualified installer
carry out operations in the most correct way in compliance
with the regulations in force.
IMPORTANT
Any adjustment, etc. must be carried out with the oven
disconnected from the electricity supply. Whenever it is
necessary to carry out maintenance work with the appliance
connected to the power supply, maximum precautions should
be taken.
Built in installation
For correct operation of the oven built into a kitchen unit or
other housing section, the latter must be suitable.
The characteristics of the housing section and instructions
for fitting in and assembling are given below (Fig. 7).
Protection against contact with electrical parts, in compliance
with current regulations, must be ensured by correct building-
in of the appliance.
All parts which guarantee protection, even any covering panel
(for example if an appliance is located at the end or beginning
of the modular units), must be fixed in such a way that it
cannot be removed without tools. It should be noted that heat-
resistant glues (90°C) must be used to bond together the
layers of plastic material and veneered wood in housing units
for built-in appliances.
Unsuitable plastic materials or glues that are not heat-
resistant are the cause of warping and ungluing.
Fitting onto base unit
The housing section must have the dimensions shown in
the figures and be fitted with supports allowing efficient
circulation of cooling air (Fig.8).
Suitable air intakes (Fig. 9) should be provided for efficient
ventilation on the bottom front part and the top part of the
appliance: bottom inlet of at least 200 cm
2
least 120 cm
.
Installation into tall housing unit
The housing section must have the dimensions shown in
the figures and be fitted with supports allowing efficient
circulation of cooling air (Fig.8), It is also essential that the
oven is fitted with a ventilation pipe as shown in fig. 10. If the
housing unit reaches the ceiling, it is indispensable to connect
an adequate channel to the ventilation pipe to convey air
outdoors.
Fixing onto base or tall housing unit
Insert the appliance into the housing section; open the oven
door and fix the oven to the kitchen unit using the four self-
screwing screws provided, placing the relative spacers "A"
placed in the four holes to be found on the outer frame (fig.11)
between the housing unit and the oven.
INSTALLATION INSTRUCTIONS
2
, top outlet of at
FIGURE 8
FIGURE 10
5
(Fig. 7)
FIGURE 9
A
FIGURE 11