Whirlpool Cabrio,- WED7300X Verwendung & Pflege Gude - Seite 11

Seite drucken

Whirlpool Cabrio,- WED7300X Verwendung & Pflege Gude

Touch POWER to turn on washer

Make sure the dispenser drawer is closed completely, then

touch POWER to turn on the washer.

Select type of load to wash

First touch a cycle from the "What to

Wash" and then select the "How to Wash"

to get the best combination cycle available

for the type of items you are going to wash.

See "Cycle Guide" for cycle details. Red,

green, and blue LED lights come on below

the time/status display when the "How to

Wash" ColorLast cycle is selected. Not all

cycles are available on all models.

Estimated Time Remaining will light up with a cycle time.

You may notice time adjusting during the cycle. This is

normal.

If you do not want to begin a cycle immediately, you may

choose DELAY START option.

To choose a delay time:

1. Touch DELAY START button to select desired delay time.

Time will increase in hour increments up to 12 hours.

2. Touch and hold START/PAUSE button to start delay start

time.

IMPORTANT: When delaying a cycle, use liquid HE

detergent only in the dispenser. Powdered detergents may

absorb moisture from a previous cycle and clump before

the wash cycle begins.

To cancel delay start:

1. Touch POWER to cancel Delay Start.

To pause delay start:

1. Touch START/PAUSE button to pause delay start.

2. Touch and hold START/PAUSE button again to start

Delay Start time. If the delay start time is not started

after 10 minutes the washer will power off.

Select cycle modifiers

Once you select a cycle, the default modifiers or the previous

set modifiers for that cycle will be lit. Touch the cycle settings

buttons to change the Soil Level, Spin Speed, and Temperature,

if desired. Not all settings are available with all cycles.

NOTE: Always read and follow fabric care labels instructions

to avoid damage to your items.

Temperature

Hot

Some cold water is added

to save energy. This will be

cooler than your hot water

heater setting

Warm

Some cold water will be

added, so this may be cooler

than what your previous

washer provided.

Cool

Warm water is added to assist

in soil removal and to help

dissolve detergents.

Cold

Warm water may be added to

assist in soil removal and to

help dissolve detergents.

Suggested Fabrics

Whites and pastels

Durable items

Heavy soils

Bright colors

Moderate to light soils

Colors that bleed or fade

Light soils

Dark colors that bleed or fade

Light soils