Whirlpool DryAire LMA1053L Handbuch - Seite 20
Blättern Sie online oder laden Sie pdf Handbuch für Trockner Whirlpool DryAire LMA1053L herunter. Whirlpool DryAire LMA1053L 32 Seiten. Drying cabinet
Auch für Whirlpool DryAire LMA1053L: Handbuch (32 seiten)
Seite drucken
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
NOTE: Sharp edges may be present.
1.
Disconnect the power to the drying cabi-
net.
2.
Remove the component panel (see page
4-2 for the procedure).
Relay
3.
Remove the two mounting screws and
lockwasher from the shield and remove
the shield from the component panel.
Shield
Screw
REMOVING THE RELAY
Screw &
Lockwasher
4-6
4.
Push down on the top of the relay case and
rotate the lower rear up to unclip the relay
from the front panel.
Push Down On Front Of Relay Case
Rotate Bottom Of Relay Case Up
5.
One at a time, loosen a wire setscrew and
pull the wire(s) out of the relay connector.
Connect the end of the wire(s) to the
terminal with the same letter/number
callout on the replacement relay. This will
help you rewire the new relay properly.
Terminal
Screw