Whirlpool 36inch Installationsanleitung und Gebrauchs- und Pflegeanleitung - Seite 9

Blättern Sie online oder laden Sie pdf Installationsanleitung und Gebrauchs- und Pflegeanleitung für Lüftungshaube Whirlpool 36inch herunter. Whirlpool 36inch 24 Seiten. Range hood 30" and 36" (76.2 cm and 91.4 cm) vented

Seite drucken

Make Electrical Connection

WARNING

Fire Hazard

Electrically ground the blower.

Use copper wire.

Connect ground wire to green ground screw in

terminal box.

Failure to do so can result in death, fire, or

electrical shock.

Direct Wire Installation

1. Connect the white wire of the home power supply with the

white wire in the range hood using a UL listed twist-on

connector.

A. White wires

B. Black wires

C. Green ground screw

D. Ground wire

E. UL listed or CSA approved strain relief

2. Connect the black wire of the home power supply with the

black wire in the range hood using a UL listed twist-on

connector.

3. Connect ground wire (green or bare) of home power supply to

the green ground screw in the terminal box.

4. Tighten strain relief screws.

5. Install the terminal box cover.

6. Reconnect power.

Complete Installation

Install 75-watt (max.) Incandescent Light Bulb

1. Squeeze the plastic lens cover and remove it from the hood.

A. Light bulb socket

B. Lens cover

2. Screw light bulb into socket.

3. Replace lens cover by squeezing cover and inserting tabs

into slots.

Check Range Hood Operation

1. Check light operation only by pressing light button.

2. Check operation of fan by pressing button to Hi and Lo

positions.

3. If the range hood does not operate, check to see whether a

circuit breaker has tripped or a house fuse has blown.

NOTE: To get the most efficient use from your new range hood,

read the "Range Hood Use" section.