Whirlpool HC646 Handbuch für Gebrauch, Pflege und Installation - Seite 8
Blättern Sie online oder laden Sie pdf Handbuch für Gebrauch, Pflege und Installation für Lüftungshaube Whirlpool HC646 herunter. Whirlpool HC646 40 Seiten.
Seite drucken
1.
Rear mounting (2 brackets are pre-installed)
Use 2 screws and 2 washers to secure the hood to the wall.
(HC338 / HC768 / HC638 / HE568 / HE438 See FIG.1, HE2421 See FIG.2,
HC646 See FIG.3)
696mm
FIG.1
2.
Top mounting
Use 4 wooden screws and 4 washers to secure the hood to the bottom of the
cabinet. Lift hood onto screws located on cabinet bottom and lock into place.
Make sure all 4 key-holes cover the screws. Tighten each screw to secure
hood to cabinet.
(HC338 / HC768 / HC638 / HE568 / HE438 See FIG.4, HE2421 See FIG.5,
HC646 See FIG.6)
Stick the two round rubber stands on the sides of hood's top(see FIG.7).
(Note: Make sure all 4 key-holes cover the screws and each screw was
tightened. Otherwise, there will be potential risk of machine falling down.)
M
OUNTING
FIG.4
FIG.6
M
ETHOD
586mm
FIG.2
4
878mm
FIG.3
FIG.5
FIG.7