Whirlpool HC646 Use, Care And Installation Manual - Page 8

Browse online or download pdf Use, Care And Installation Manual for Ventilation Hood Whirlpool HC646. Whirlpool HC646 40 pages.

Print Page

Rear mounting (2 brackets are pre-installed)

Use 2 screws and 2 washers to secure the hood to the wall.

(HC338 / HC768 / HC638 / HE568 / HE438 See FIG.1, HE2421 See FIG.2,

HC646 See FIG.3)

696mm

FIG.1

Top mounting

Use 4 wooden screws and 4 washers to secure the hood to the bottom of the

cabinet. Lift hood onto screws located on cabinet bottom and lock into place.

Make sure all 4 key-holes cover the screws. Tighten each screw to secure

hood to cabinet.

(HC338 / HC768 / HC638 / HE568 / HE438 See FIG.4, HE2421 See FIG.5,

HC646 See FIG.6)

Stick the two round rubber stands on the sides of hood's top(see FIG.7).

(Note: Make sure all 4 key-holes cover the screws and each screw was

tightened. Otherwise, there will be potential risk of machine falling down.)

OUNTING

FIG.4

FIG.6

ETHOD

586mm

FIG.2

878mm

FIG.3

FIG.5

FIG.7