Backyard Living Structures PERGOLA Installationshandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Installationshandbuch für Outdoor-Einrichtung Backyard Living Structures PERGOLA herunter. Backyard Living Structures PERGOLA 15 Seiten.

Seite drucken
STEP 4
ATTACH LEDGER TO STRUCTURE [ATTACHED
PERGOLAS ONLY]
Framing of Structure
(studs, headers,
wall plates, or similar)
Optional:
½" LedgerLOK
or equivalent 16" OC
(not provided)
PVC Ledger Plate 1"x10" or 1"x12"
Required:
Rafter Hanger attached with
(6) Heavy Shank Screws
(not provided)
a.
Secure ledger to structure ensuring it is centered on
pergola –
PRO TIP: layout and mark rafter hanger
locations prior to installation of ledger plate.
b.
Fasteners – Necessary fasteners for Ledger
are NOT provided in kit. Requirements
determined by structure.
c.
Minimum height for rafter attachment
without modification:
•
2x6 Rafter - skirt is 7 ½" tall, 1"x10" Azek
Trim Ledger Plate is ¾" thick x 9 ¼" tall
•
2x8 Rafter – skirt is 9 ½" tall, 1"x12" Azek
Trim Ledger Plate is ¾" thick x 11 ¼" tall
NOTE: for a tight spot you can trim PVC
•
ledger Plate or rafter skirt to reduce the
overall height of rafter attachment.
d.
Attach rafter hangers based on
your layout measurements.
10
Heavy Bead
Silicone Caulk
Attach Rafter to Rafter Hanger with
(4)
⁄
"x1" Hex Screws
5
16
®
Skirt with Locking Tabs (tabs MUST point down)
Sheathing
Siding
⁄
"
5
8
plugs
Rafter and
Aluminum Insert
NOTE:
If removing siding, ensure that ledger
plate is properly flashed and sealed.
If ledger is installed over top of siding, ensure
that top and sides are caulked adequately.
www.backyardlivingstructures.com
⁄
"x1"
3
8
Hex Screw
800-352-1672