fireStorm I Series Benutzerhandbuch und Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Benutzerhandbuch und Gebrauchsanweisung für Außenkamin fireStorm I Series herunter. fireStorm I Series 12 Seiten.

Seite drucken

C O N N E CT I N G T H E H O S E TO T H E B U RN E R B OX AN D

C O M P L E T I N G AS S E M B LY

The QUICK CONNECT is used to connect the FIRESTORM to your gas supply.

Before using the unit, inspect the hose assembly for excessive wear or damage. If you notice any issues, replace the hose

before operating the appliance. Contact Live Outdoor to obtain a replacement hose.

Tip the shell slightly to one side to allow you to pull about 18" of the VALVE CONNECTOR end of the HOSE under the

BACK PANEL and inside the shell.

Locate the BURNER VALVE on the back of the BURNER BOX on the opposite side from the CONTROL KNOB.

[Photo A1].

Connect the HOSE to the BURNER VALVE by pulling back the spring collar on the HOSE SOCKET and pushing the

SLEEVE onto the BURNER VALVE. Confirm the connection is locked in place and secure by tugging on the hose.

[Photo A2].

Burner Valve

Photo A1: Burner Box

INCOMPLETE QUICK CONNECT CONNECTION

Align the CONTROL KNOB with the FRONT PANEL and then set the BURNER BOX in the shell.

For more detailed asssembly instructions, please scan the QR Code on page 6.

Socket

Sleeve

(FIG. 2)

(FIG. 3)

Sleeve

www.GoLiveOutdoor.com | (720) 679-9800 | [email protected]

Burner Valve

Photo A2: Quick Connect Properly Connected to

Burner Box

Burner Valve

(FIG. 1)

Burner Valve

COMPLETE QUICK CONNECT CONNECTION

Hose Socket