Firetide HotPoint 5100 Hardware-Installationshandbuch - Seite 15

Blättern Sie online oder laden Sie pdf Hardware-Installationshandbuch für Drahtloser Zugangspunkt Firetide HotPoint 5100 herunter. Firetide HotPoint 5100 19 Seiten.
Auch für Firetide HotPoint 5100: Handbuch (2 seiten)

Firetide HotPoint 5100 Hardware-Installationshandbuch

Indoor access point installation

You need to install the access point in a permanent location that meets the
product's operational requirements and install the antennas correctly.

Appropriate locations for an indoor access point

You can install an indoor access point on a desk top or counter.
You can also attach the device to a wall or ceiling. When you intend to install the
device to a wall or ceiling, use the correct mount hardware.

Antenna installation

Follow the manufacturer's installation diagram or procedures that come with the
antenna that you want to use with the access point.

Recommendations for outdoor use

If you want to use this device in an outdoor environment, you need to use special
pigtails.
Operational requirements
The HotPoint 5100 access point operates within these environmental
constraints:
• Operating temperature: 0 °C to +50 °C (32 °F to +122 °F)
• Storage temperature: -20°C to +70 °C (-4 °F to +158 °F)
• Humidity (non-condensing): 10% to 90%
• Storage humidity (non-condensing): 10% to 90%
• Maximum altitude: 4572 m (5,000 feet)
Installing the mesh node in an enclosure
If you install an access point in an enclosure not manufactured by Firetide, the
installation is not supported.
Refer to the product operational requirements to make sure that the enclosure
you select is compatible with the operating environment required by the
HotPoint 5100 access point.
9