ALcom CL-3121 IDM Benutzerhandbuch - Seite 10

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Schnurloses Telefon ALcom CL-3121 IDM herunter. ALcom CL-3121 IDM 13 Seiten. Ultra clear long range caller id cordless phone

Seite drucken

PAGE 14

Transferring Calls (Cordless Handset to another Cordless Handset)

If extra cordless handsets are set to the base unit,

1. In talk mode, press

INT/TRANS.

button then the other cordless handset number. The outside

line will be on hold and make music sounds to the other end. Both the two cordless handsets

will ring.

2. If the other cordless handset user does not answer, press

to the call.

3. The other cordless handset user can press

automatically after receiving the transfer ring.

4. If the other cordless handset does not respond within 25 seconds, the line will disconnect

automatically.

NOTE:

There is no intercom between the handsets.

3-B. Intercom function

You can have a two-way conversation between the cordless handset and base unit through the

intercom feature.

Activating the Intercom With the Base Unit:

1. In standby mode, press

INT

button then press the cordless handset number, the base and

cordless handset will ring.

2. The base unit user can cancel the intercom by pressing

or pick up the corded handset.

3. The cordless handset user can respond by pressing

USE on base unit and channel number on cordless handset. The both unit enter into the

intercom state. The base unit can talk in

SPEAKERPHONE

4. The cordless handset user can end the conversation by pressing

INT/TRANS.

button or put the cordless handset on charger.

PART 3: Special functions

TALK/ST-BY

button again to return

TALK/ST-BY

button to answer the call

INT

button or

SPEAKERPHONE

button

INT/TRANS.

button, the LCD shows HS-1

mode or pick up the corded handset.

TALK/ST-BY

button or

PART 2: Telephone Operations

2-A. Digital Security

IMPORTANT NOTICE: The base unit and the cordless handset in your hands have been

already factory code set.

If you need to register the code again, please do as follow:

1. Make sure the base unit is connected into the AC power outlet.

2. Press and hold

CODE

button on the base unit.

3. Press and hold

CH.

button on the cordless handset. The handset will make a sound for

confirmation of code setting and the LCD will indicate the handset No(

button.

4. If you have more than one handset, pick up the second handset, press and hold

until you get a beep and display

- 2. If you have the third handset, continue the same

procedure. If not, release the

CODE

button on the base unit.

NOTE

: The

CODE

button on the base unit should be kept pressing during the whole procedure.

2-B. Handset On/Off Switch

* In the standby mode, press

DEL/

button for about 3 seconds and the power turns off,

will show on the LCD. In this mode, all functions are invalid but to recharge.

* Press

DEL/

button again for about 3 seconds and the power turns on, and the LCD shows

real time, you can do any operation in this mode.

ATTENTION!

When the

and the

the unit need to be recharged, you can not do any other operation but to

recharge the battery. When the power is full, the OF will disappear

automatically and the battery icon shows as

PAGE 7

-1). Then release

CH.

low battery icon

show on the LCD,

CH.

button