Ergo EMPRO-WM175B Gebrauchsanweisung - Seite 7

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Racks & Ständer Ergo EMPRO-WM175B herunter. Ergo EMPRO-WM175B 13 Seiten. Flat panel swing out arm

Seite drucken

DIMPLES

FACING UP

DIMPLES

FACING UP

Dimples

DIMPLES

FACING DOWN

DIMPLES

FACING DOWN

Mounting Hardware

Mounting Bracket

Griplate™

Mounting Point

Universal Spacer

Flat Panel

Griplate™ Installation

The Griplates™ have M4, M5, M6 and M8 hole

patterns to fi t the hardware that your fl at panel

requires. Eg. If your fl at panel uses M8 screws, use

the M8 mounting points.

NB. Pre-install the mounting screws, universal

spacers and Griplates™ . Once mounted, push down

to eliminate movement from the bracket, then

tighten the rest if the hardware. Repeat this process

for the installation of the remaining bracket.

Mounting Bracket Installation

This kit provides a variety of screws with diff erent

lengths and diameters to accommodate most fl at

panels.

NB. The number and location of mounting points

will vary between manufacturers.

Do not over-tighten the screws.

Place your fl at panel screen down on a soft, fl at

surface and locate the threaded mounting points

that are located on the back of the fl at panel.

Determine which screw is the correct length.

Attach each bracket to the fl at panel by aligning the

holes on each bracket with the threaded inserts on

the back of your fl at panel, insert the screws through

both and turn clockwise until they are fully inserted.