Ergo Systems 20008D Benutzerhandbuch - Seite 5

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Haustierpflegeprodukt Ergo Systems 20008D herunter. Ergo Systems 20008D 12 Seiten. 8 day auto pet feeder
Auch für Ergo Systems 20008D: Benutzerhandbuch (15 seiten)

Installing batteries in the Timer Module.
Step 1
p Place the feeder bottom side up. You will
find the battery compartment at the back of
the Timer Module.
Fig-4
Step 3
p Install 3 new AA batteries in the battery
compartment.
Fig-6
NOTE:
Always install new batteries. When you replace the
old battery you must do it within 1 minute or you will
loose the programs.
Replacing Timer Module
p In the event that the timer module has to be
replaced, place the feeder bottom side up. Then
remove the two screws that attach the timer to
the feeder base.
p Then turn the feeder rightside up and lift the
timer out of the base.
p To install timer follow the above steps in reverse.
Step 2
p Open the battery compartment by pushing
the plastic tab to the left and lift up.
Step 4
p Close and latch the cover.
THE TIMER WILL MAKE A BEEPING
SOUND WHEN THE BATTERY IS LOW
The bottom view of the 8 day feeder
5
Fig-5
Fig-7
Screw