Ergo Systems 20008D Gebruikershandleiding - Pagina 5

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Ergo Systems 20008D. Ergo Systems 20008D 12 pagina's. 8 day auto pet feeder
Ook voor Ergo Systems 20008D: Gebruikershandleiding (15 pagina's)

Pagina afdrukken

Installing batteries in the Timer Module.

Step 1

p Place the feeder bottom side up. You will

find the battery compartment at the back of

the Timer Module.

Fig-4

Step 3

p Install 3 new AA batteries in the battery

compartment.

Fig-6

NOTE:

Always install new batteries. When you replace the

old battery you must do it within 1 minute or you will

loose the programs.

Replacing Timer Module

p In the event that the timer module has to be

replaced, place the feeder bottom side up. Then

remove the two screws that attach the timer to

the feeder base.

p Then turn the feeder rightside up and lift the

timer out of the base.

p To install timer follow the above steps in reverse.

Step 2

p Open the battery compartment by pushing

the plastic tab to the left and lift up.

Step 4

p Close and latch the cover.

THE TIMER WILL MAKE A BEEPING

SOUND WHEN THE BATTERY IS LOW

The bottom view of the 8 day feeder

Fig-5

Fig-7

Screw