ERGO-INNOVATE EI6151 Gebrauchsanweisung - Seite 10

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für TV-Halterung ERGO-INNOVATE EI6151 herunter. ERGO-INNOVATE EI6151 12 Seiten. Full-motion tv wall mount

Seite drucken
Step 3B Solid Concrete or Concrete Block Option
WARNING:
Avoid potential personal injury or property damage! DO NOT over-tighten the lag
screws [A1]. Tighten the lag screws [A1] only until they are pulled firmly against
the arm assembly/wall plate [01B].
Ensure the arm assembly/wall plate [01B] is securely fastened
to the wall before continuing to the next step.
● Any material covering the wall must not exceed 5/8 in. (16 mm)
● Mount the arm assembly/wall plate directly onto the concrete surface
● Minimum solid concrete thickness: 203 mm (8 in.)
● Minimum concrete block size: 203 x 203 x 406 mm (8 x 8 x 16 in.)
● Never drill into the mortar between blocks
3B-1
01B
3B-2
3B-3
1
2
3
4
Drill 4 pilot holes using a 3/8 in.
(10mm) diameter drill bit. Make sure
the depth is not less than 2 9/16 in.
(65mm). Never drill into the mortar
between blocks.
Use the hammer to knock anchors
[A2] into the wall.
Be sure the anchors [A2] are seated
A2
flush with the concrete surface.
09
Position arm assembly-
/wall plate [01B] at your
desired height, level the
wall plate and mark the
pilot hole locations.
UP
A2
2 9/16 in.(65mm)
ø3/8 in.(10mm)