ERGO-INNOVATE EI6151 Gebrauchsanweisung - Seite 11

Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für TV-Halterung ERGO-INNOVATE EI6151 herunter. ERGO-INNOVATE EI6151 12 Seiten. Full-motion tv wall mount

3B-4
A1
01B
Step 4 Secure the TV onto the Arm Assembly/Wall Plate [01B]
4-1. Remove the preassembled bolt [S1] from the faceplate [01A] using the
phillips screwdriver.
4-2. Hang the TV to the arm assembly/wall plate, making sure the upper bolt
hangs on the hook on the arm assembly/wall plate.
4-3. Tighten the bolt [S1] to secure the TV to the arm assembly/wall plate.
S1
Phillips
1/2 in.(13mm)
Screwdriver
Socket Wrench
(Not lncluded)
(Not lncluded)
Install wall plate using lag screws
[A1]. Tighten the lag screws [A1]
only until they are pulled firmly
against the arm assembly/ wall
plate [01B]. DO NOT over-tight-
en the lag screws [A1].
UP
S1
10
You may need assistance
with this step.
3/8in. (10mm)
Socket Wrench
(Not lncluded)
Tighten
HEAVY! You may need
assistance with this step.
01B