AlcoSense ELITE Gebrauchsanweisung - Seite 7
Blättern Sie online oder laden Sie pdf Gebrauchsanweisung für Prüfgeräte AlcoSense ELITE herunter. AlcoSense ELITE 20 Seiten.
- 1. Table of Contents
- 2. Introduction
- 3. Getting Started
- 4. Turning On/Off
- 5. Setting Time
- 6. Changing Units of Measurement
- 7. Activating the Sensor
- 8. Automatic Sensor Clean (ASC)
- 9. How to Establish if an ASC Is Needed
- 10. Quick Sensor Clean
- 11. Performing a Blow Test
- 12. Understanding the Results
- 13. Maintaining Your Alcosense
- 14. Accessories
- 15. Servicing
- 16. Legal
4) You can then change the setting by pressing either the + or – keys. Once
you have got it to the desired setting press the 'SET' key again to save it.
The different options that you can adjust are:
1. Clock – Set the time.
2. ASC – Auto Sensor Clean please see section dedicated to this function.
3. Unit – This allows the user to change the unit of measurement
from mg/l to ‰BAC.
4. Clean – This allows you to do a quick sensor clean. It is automatically
performed after every breath test performed.
Setting the Time
To set the time you will need to access the menu system (please see section
'Using the Menu System' on page 6) and select the CLOCK option. When
selected, press the SET key.
You can then use the + and – keys to change the minutes. When the minutes
are correct press the SET key, you will now be able to change the hours
using the + and – keys. When the hour is correct press SET again to confirm
the time and then press MODE to save the setting.
Changing the Unit of Measurement
You can change the AlcoSense's unit of measurement between mg/l
(Milligrams of alcohol per Litre of Breath ) or ‰BAC (per mil Blood Alcohol
Concentration). The two different units of measurement are two different
scales, like degrees Celsius and degrees Fahrenheit in temperature. You can
change the unit of measurement as follows:
1) With the AlcoSense breathalyser in the closed position hold down the
MODE key until you hear a beep. Then press the mode key repeatedly
until the indicator reaches the UNIT option.
2) Press the SET key. You can now change between ‰BAC and mg/l. Press
the + key to select ‰BAC and press the – key to select mg/l.
3) When you have selected the unit you wish to use, press the SET key once
again and this will save your preferred option.
7