- ページ 7

試験装置 AlcoSense ELITEのPDF 取扱説明書をオンラインで閲覧またはダウンロードできます。AlcoSense ELITE 20 ページ。

4) You can then change the setting by pressing either the + or – keys. Once

you have got it to the desired setting press the 'SET' key again to save it.

The different options that you can adjust are:

1. Clock – Set the time.

2. ASC – Auto Sensor Clean please see section dedicated to this function.

3. Unit – This allows the user to change the unit of measurement

from mg/l to ‰BAC.

4. Clean – This allows you to do a quick sensor clean. It is automatically

performed after every breath test performed.

Setting the Time

To set the time you will need to access the menu system (please see section

'Using the Menu System' on page 6) and select the CLOCK option. When

selected, press the SET key.

You can then use the + and – keys to change the minutes. When the minutes

are correct press the SET key, you will now be able to change the hours

using the + and – keys. When the hour is correct press SET again to confirm

the time and then press MODE to save the setting.

Changing the Unit of Measurement

You can change the AlcoSense's unit of measurement between mg/l

(Milligrams of alcohol per Litre of Breath ) or ‰BAC (per mil Blood Alcohol

Concentration). The two different units of measurement are two different

scales, like degrees Celsius and degrees Fahrenheit in temperature. You can

change the unit of measurement as follows:

1) With the AlcoSense breathalyser in the closed position hold down the

MODE key until you hear a beep. Then press the mode key repeatedly

until the indicator reaches the UNIT option.

2) Press the SET key. You can now change between ‰BAC and mg/l. Press

the + key to select ‰BAC and press the – key to select mg/l.

3) When you have selected the unit you wish to use, press the SET key once

again and this will save your preferred option.