Xerox WORKCENTRE 7435 Ergänzendes Handbuch - Seite 18

Blättern Sie online oder laden Sie pdf Ergänzendes Handbuch für Drucker Xerox WORKCENTRE 7435 herunter. Xerox WORKCENTRE 7435 49 Seiten. Security function
Auch für Xerox WORKCENTRE 7435: Referenzhandbuch (28 seiten), Broschüre & Specs (8 seiten), Spezifikationen (15 seiten), Handbuch für Auswerter (32 seiten), Spezifikationen (14 seiten), Software-Upgrade (2 seiten), Schnellstart-Handbuch (7 seiten)

Seite drucken
Xerox WORKCENTRE 7435 Ergänzendes Handbuch

Set SNMPv3

1.
Click [+] on the left of the [Connectivity] folder on the [Properties] screen.
2.
Click [+] on the left of the [Protocols] folder.
3.
Click [SNMP Configuration].
4.
Check the [Enable SNMPv3 Protocol] box.
5.
Uncheck the [Enable SNMP v1/v2c Protocols] box.
6.
Click the [Apply] button.
7.
Click the [Edit SNMPv3 Properties] button and check the [Account Enabled] for [Administrator Account].
8.
Enter a new Authentication Password (minimum 8 characters).
9.
Enter the Confirm Authentication Password.
10. Enter a new Privacy Password (minimum 8 characters).
11. Enter the Confirm Privacy Password.
12. Check the [Account Enabled] for [Print Drivers/Remote Clients Account].
13. Click the [Apply] button.
Note:
Authentication Password and Privacy Password have to be changed certainly from default Password.
•
In using SNMPv3, use the IPSec protocol simultaneously. Therefore the IP address of the client for SNMPv3
•
have to be set according to the procedures "Set IPSec Address" (3.5).
Enter the IP Address in the [Specify Destination IPv4 Address] box.
Since the machine cannot communicate by SNMP v1/v2, the port setting on the client Print Driver have to be
•
select [LPR] for [Protocol], and uncheck the [SNMP status Enabled].
18