Xerox Phaser 750DX Service-Handbuch - Seite 33

Blättern Sie online oder laden Sie pdf Service-Handbuch für Drucker-Zubehör Xerox Phaser 750DX herunter. Xerox Phaser 750DX 40 Seiten. Digital color printer / copier
Auch für Xerox Phaser 750DX: Spezifikationen (2 seiten), Broschüre & Specs (4 seiten), Referenzhandbuch (8 seiten), Handbuch (9 seiten)

Seite drucken
Xerox Phaser 750DX Service-Handbuch
Status
Code
10-370
The control logic sensed that the Pressure Roll did not reach operating temperature.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-371
The control logic sensed that the Pressure Roll Heat Rod did not turn off after the Pressure Roll reached operating
temperature.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-372
The control logic sensed that the Pressure Roll did not return to operating temperature after a job run.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
5750 DocuCare Service Manual
Description/Direction
5/98
2-33
Fault Code Procedures