Xerox Phaser 750DX Service-Handbuch - Seite 34

Blättern Sie online oder laden Sie pdf Service-Handbuch für Drucker-Zubehör Xerox Phaser 750DX herunter. Xerox Phaser 750DX 40 Seiten. Digital color printer / copier
Auch für Xerox Phaser 750DX: Spezifikationen (2 seiten), Broschüre & Specs (4 seiten), Referenzhandbuch (8 seiten), Handbuch (9 seiten)

Seite drucken
Xerox Phaser 750DX Service-Handbuch
Status
Code
10-373
The control logic sensed that the Pressure Roll could not maintain temperature during a copy run.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-374
The control logic sensed that the Pressure Roll did not reach operating temperature within 150 seconds after Power
Saver mode was exited.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-375, 376
The control logic sensed that the Pressure Roll temperature exceeded 180˚.
Initial action:
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-34
5750 DocuCare Service Manual