Xerox Phaser 750DX Panduan Servis - Halaman 34

Jelajahi secara online atau unduh pdf Panduan Servis untuk Aksesori Printer Xerox Phaser 750DX. Xerox Phaser 750DX 40 halaman. Digital color printer / copier
Juga untuk Xerox Phaser 750DX: Spesifikasi (2 halaman), Brosur & Spesifikasi (4 halaman), Panduan Referensi (8 halaman), Manual (9 halaman)

Halaman Cetak
Xerox Phaser 750DX Panduan Servis
Status
Code
10-373
The control logic sensed that the Pressure Roll could not maintain temperature during a copy run.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-374
The control logic sensed that the Pressure Roll did not reach operating temperature within 150 seconds after Power
Saver mode was exited.
Initial action:
Ensure that the Pressure Roll surface is clean (no debris, paper, etc.) (REP 5.35)
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
10-375, 376
The control logic sensed that the Pressure Roll temperature exceeded 180˚.
Initial action:
Check the Pressure Roll Control Thermistor for cleanliness, damage and excessive wear at the point where
the Thermistor contacts the Pressure Roll (REP 5.37).
If the problem still exists:
Place a service call.
Fault Code Procedures
Description/Direction
5/98
2-34
5750 DocuCare Service Manual