Xerox DocuTech 6155 Planungshandbuch - Seite 22
Blättern Sie online oder laden Sie pdf Planungshandbuch für Software Xerox DocuTech 6155 herunter. Xerox DocuTech 6155 38 Seiten. Xerox docutech 6155: install guide
Auch für Xerox DocuTech 6155: Spezifikationsblatt (2 seiten), Erste Schritte (28 seiten), Planungshandbuch (20 seiten), Planungshandbuch (16 seiten), Freigabemitteilung (2 seiten), Handbuch installieren (2 seiten)
Seite drucken
C.P. Bourg Document Finisher (BDFx)
Limitations
System Dependencies and Prerequisites
•
Due to the height of the bypass transport on DocuTech 1xx
HLC it is not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
•
The BDFx can only be guaranteed to work to its maximum
book thickness when feeding (8.5 x 11 / A4) paper if the
paperweight is 90 gsm or less. (Long grain paper with a
weight above 90 gsm should be tested with the customer
paper and application before selling the BDFx.)
•
Use of short grain paper is highly recommended for 11 x 17"
/ A3 sized paper.
Listed below are the dependencies and prerequisites for
installing the BDFx, BCFx and SQEDG module.
•
The printer must be equipped with a Bypass Transport to
enable In-line Finishing.
•
It is highly recommended that the printer is equipped with a
Bourg Sheet Rotator (BSR) to maximize output.
•
Due to the height of the bypass transport on DocuTech 1xx
HLC it is not possible to attach the BCFx without the BSR.
•
Requires a minimum of 2 skipped pitches (3 skipped pitches
with BCF), which results in low productivity with small
booklets. (A3/ 11 x 17 requires only one skipped pitch with or
without the BCF.)
3-2