Xerox DocuTech 6155 계획 매뉴얼 - 페이지 22

{카테고리_이름} Xerox DocuTech 6155에 대한 계획 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Xerox DocuTech 6155 38 페이지. Xerox docutech 6155: install guide
Xerox DocuTech 6155에 대해서도 마찬가지입니다: 사양 시트 (2 페이지), 시작하기 (28 페이지), 계획 매뉴얼 (20 페이지), 계획 매뉴얼 (16 페이지), 릴리스 노트 (2 페이지), 설치 매뉴얼 (2 페이지)

페이지 인쇄

C.P. Bourg Document Finisher (BDFx)

Limitations

System Dependencies and Prerequisites

•

Due to the height of the bypass transport on DocuTech 1xx

HLC it is not possible to attach the BCFx without the BSR.

•

Requires a minimum of 2 skipped pitches (3 skipped pitches

with BCF), which results in low productivity with small

booklets. (A3/ 11 x 17 requires only one skipped pitch with or

without the BCF.)

•

The BDFx can only be guaranteed to work to its maximum

book thickness when feeding (8.5 x 11 / A4) paper if the

paperweight is 90 gsm or less. (Long grain paper with a

weight above 90 gsm should be tested with the customer

paper and application before selling the BDFx.)

•

Use of short grain paper is highly recommended for 11 x 17"

/ A3 sized paper.

Listed below are the dependencies and prerequisites for

installing the BDFx, BCFx and SQEDG module.

•

The printer must be equipped with a Bypass Transport to

enable In-line Finishing.

•

It is highly recommended that the printer is equipped with a

Bourg Sheet Rotator (BSR) to maximize output.

•