Direct Supply Panacea TILT CHAIR Benutzerhandbuch - Seite 9
Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Wheelchair Direct Supply Panacea TILT CHAIR herunter. Direct Supply Panacea TILT CHAIR 16 Seiten. Weight capacity standard: 350 lbs.; bariatric: 450 lbs.
Legrest & Foot Plate
To adjust the legrest angle:
• Pull the release lever located on the back side of the legrest on the left side (Figure 10).
• Raise or lower the legrest to the desired position. During this process, the caregiver also should
use his or her other hand to help guide the legrest into place.
• Release the lever to lock into place.
To adjust the height of the foot plate (if the chair is equipped with a footrest):
• Pull the release pin located directly underneath the legrest (Figure 11).
• Pull the foot plate up or down until the desired position is achieved. Height adjustment is in
1" increments.
• Release the pin to lock into place.
• WARNING: Do not use the legrest or foot plate as a platform. Standing on, exerting pressure or
stepping on the legrest or foot plate could cause the chair to tip or may cause damage to the chair or
personal injury.
• WARNING: When transferring into or out of the chair, make sure the foot plate is folded in the
upward position and the legrest is in the stored position.
NOTE: The foot plate is hinged and can be folded up or down as needed.
Figure 10
Figure 11
1-800-634-7328
DirectSupply.com
9