Direct Supply Panacea TILT CHAIR Owner's Manual - Page 9

Browse online or download pdf Owner's Manual for Wheelchair Direct Supply Panacea TILT CHAIR. Direct Supply Panacea TILT CHAIR 16 pages. Weight capacity standard: 350 lbs.; bariatric: 450 lbs.

Print Page

Legrest & Foot Plate

To adjust the legrest angle:

• Pull the release lever located on the back side of the legrest on the left side (Figure 10).

• Raise or lower the legrest to the desired position. During this process, the caregiver also should

use his or her other hand to help guide the legrest into place.

• Release the lever to lock into place.

To adjust the height of the foot plate (if the chair is equipped with a footrest):

• Pull the release pin located directly underneath the legrest (Figure 11).

• Pull the foot plate up or down until the desired position is achieved. Height adjustment is in

1" increments.

• Release the pin to lock into place.

• WARNING: Do not use the legrest or foot plate as a platform. Standing on, exerting pressure or

stepping on the legrest or foot plate could cause the chair to tip or may cause damage to the chair or

personal injury.

• WARNING: When transferring into or out of the chair, make sure the foot plate is folded in the

upward position and the legrest is in the stored position.

NOTE: The foot plate is hinged and can be folded up or down as needed.

Figure 10

Figure 11

1-800-634-7328

DirectSupply.com