eControls WT3 Handbuch für Hausbesitzer und Installateure - Seite 2

Blättern Sie online oder laden Sie pdf Handbuch für Hausbesitzer und Installateure für Zeitschaltuhr eControls WT3 herunter. eControls WT3 8 Seiten. Wall timer control kit

Seite drucken

Before operating your Whole House Fan (WHF), always OPEN windows. See the WHF

Owners manual for more information. Your A/C should be off during WHF operation.

Turning the WHF ON or OFF

When the WHF is OFF, the LEDs on the wall timer are

not lit.

To turn the WHF ON, press the TIMER

WHF will go ON and an LED will indicate the number of

timer hours set, either 2, 4, 6 or 8.

To turn the WHF OFF, press the TIMER

WHF will go OFF and no LEDs will be lit.

Changing the Timer Hours

The wall timer remembers the last timer setting and

when the WHF is turned on, the wall timer will use this

timer setting.

To change the Timer Hours, PRESS and HOLD the

TIMER

SWITCH

to select the timer period. The LEDs

will cycle from 2 to 4 to 6 to 8 hours while the Timer

switch is pressed. RELEASE the TIMER

the desired number of hours is indicated. If the WHF was

on, it will remain on. If the WHF was off, setting the timer

will turn the WHF on.

HOMEOWNER

Viewing the Selected WHF Speed

To view the WHF speed, PRESS the SPEED

and the LED corresponding to the selected speed will be

lit. The wall timer will then return to displaying the timer

SWITCH

. The

hours.

Changing the WHF Speed

SWITCH

. The

To change the WHF speed, PRESS and HOLD the

SPEED

LEDs will cycle between the available speeds while the

Speed switch is pressed. RELEASE the SPEED

SWITCH when the desired speed is indicated.

If you have a Single Speed WHF:

The Speed switch will not change the speed and the

speed will remain as HI.

If you have a Two-Speed WHF:

SWITCH

when

The Speed switch will cycle between LO and HI.

If you have a Three-Speed WHF

The Speed switch will cycle between LO, MED and HI.

SWITCH

to select LO, MED or HI speed. The

SWITCH