eControls WT3 Handbuch für Hausbesitzer und Installateure - Seite 8

Blättern Sie online oder laden Sie pdf Handbuch für Hausbesitzer und Installateure für Zeitschaltuhr eControls WT3 herunter. eControls WT3 8 Seiten. Wall timer control kit

5)
Turn on WHF and Test Operation
Make sure the following has been completed before turning WHF On.
The number of fan speeds has been set - Outlined in Step 4 if different than the default fan speeds (2).
Test the WHF Operation
Turn WHF ON by PRESSING the TIMER SWITCH. Confirm WHF turned ON.
Turn WHF OFF by PRESSING the TIMER SWITCH. Confirm WHF turned OFF.
Change the fan speed by PRESSING the SPEED SWITCH and select the next available speed.
Confirm WHF changed speeds. Repeat as necessary depending on number of fan speeds available.
Optional Damper Control
An optional Damper Control, Model DCXX, is available
when power actuators are required for heavy duty
dampers with higher thermal insulation.
The Damper Control is installed in a separate electrical
box and connected to the damper actuators and either
24VAC or 120VAC depending on the actuators and
corresponding Damper Control being used.
See DCXX datasheet for more information.
Limited 5-Year Warranty
The 5-year warranty is limited to the repair or replacement of
defective product due to parts failure or defective workmanship.
INSTALLATION
26072 Merit Circle #110 / Laguna Hills, CA 92653
949-916-0945 Fax 949-458-8502 / eControlsUSA.com
11
e
Controls
Controls Make The Difference