eControls WT3 Manual del propietario y del instalador - Página 8

Navegue en línea o descargue pdf Manual del propietario y del instalador para Timer eControls WT3. eControls WT3 8 páginas. Wall timer control kit

Turn on WHF and Test Operation

Make sure the following has been completed before turning WHF On.

The number of fan speeds has been set - Outlined in Step 4 if different than the default fan speeds (2).

Test the WHF Operation

Turn WHF ON by PRESSING the TIMER SWITCH. Confirm WHF turned ON.

Turn WHF OFF by PRESSING the TIMER SWITCH. Confirm WHF turned OFF.

Change the fan speed by PRESSING the SPEED SWITCH and select the next available speed.

Confirm WHF changed speeds. Repeat as necessary depending on number of fan speeds available.

Optional Damper Control

An optional Damper Control, Model DCXX, is available

when power actuators are required for heavy duty

dampers with higher thermal insulation.

The Damper Control is installed in a separate electrical

box and connected to the damper actuators and either

24VAC or 120VAC depending on the actuators and

corresponding Damper Control being used.

See DCXX datasheet for more information.

Limited 5-Year Warranty

The 5-year warranty is limited to the repair or replacement of

defective product due to parts failure or defective workmanship.

INSTALLATION

26072 Merit Circle #110 / Laguna Hills, CA 92653

949-916-0945 Fax 949-458-8502 / eControlsUSA.com

Controls

Controls Make The Difference