Yamaha DM 2000 Version 2 Benutzerhandbuch - Seite 19

Blättern Sie online oder laden Sie pdf Benutzerhandbuch für Musikinstrument Yamaha DM 2000 Version 2 herunter. Yamaha DM 2000 Version 2 44 Seiten. Version 2
Auch für Yamaha DM 2000 Version 2: Installationshandbuch (28 seiten), Installationshandbuch (14 seiten), Installationshandbuch (22 seiten), Software-Installationshandbuch (13 seiten), Benutzerhandbuch (1 seiten), Ergänzendes Handbuch (4 seiten), Benutzerhandbuch (37 seiten), Setup-Handbuch (35 seiten), Orientierungshandbuch (8 seiten), Redundanz-Handbuch (8 seiten), Benutzerhandbuch (3 seiten), (German) Betriebssystem-Installationshandbuch (13 seiten)

Seite drucken
Yamaha DM 2000 Version 2 Benutzerhandbuch

Input Channels

An Input Channel from the Console window is shown below.
S
T
V
A
SOURCE parameter
1
This parameter is used to select an Input source. To select an
Input source, click the parameter and choose from the list that
B
appears.
B
Bus Out routing buttons
C
These buttons are used to route the Input Channel's signal to
D
one or more of the Bus Outs.
5
6
C
STEREO button
7
This button is used to route the Input Channel's signal to the
8
Stereo Out.
9
D
DIRECT button
J
K
This button turns on and off the Input Channel's routing to its
Direct Out.
L
E
Direct Out destination
M
This parameter is used to select a Direct Out destination. To
N
select a destination, click the parameter and choose from the list
that appears.
O
P
F
PHASE button
Q
This button is used to reverse the signal phase of the channel.
G
INSERT button
This button is used to turn on and off the Input Channel's Insert.
H
GATE button
R
This button is used to turn on and off the Input Channel's Gate.
I
Gate open & closed indicators
These indicators display whether the Gate is open (green) or
closed (red), when the Gate is turned on.
J
Gate Threshold display
This display shows the Threshold setting of the Gate. The value
can be set by dragging.
U
K
COMP button
W
This button is used to turn on and off the Input Channel's Com-
X
Y
pressor.
Z
L
Compressor curve display
This display shows the Compressor's curve.
M
EQ button
a
This button is used to turn on and off the Input Channel's
4-band Parametric Equalizer.
N
EQ curve display
This display shows the Equalizer's curve, which
can be set by dragging.
b
O
DELAY button
This button is used to turn on and off the Input Channel's Delay
function.
Input Channels
Studio Manager—Owner's Manual
16