Yamaha DM 2000 Version 2 Manuel du propriétaire - Page 19

Parcourez en ligne ou téléchargez le pdf Manuel du propriétaire pour {nom_de_la_catégorie} Yamaha DM 2000 Version 2. Yamaha DM 2000 Version 2 44 pages. Version 2
Également pour Yamaha DM 2000 Version 2 : Manuel d'installation (28 pages), Manuel d'installation (14 pages), Manuel d'installation (22 pages), Manuel d'installation du logiciel (13 pages), Manuel du propriétaire (1 pages), Manuel complémentaire (4 pages), Manuel du propriétaire (37 pages), Manuel de configuration (35 pages), Manuel d'orientation (8 pages), Manuel de redondance (8 pages), Manuel du propriétaire (3 pages), (French) Guide d'installation du système d'exploitation (13 pages)

Imprimer la page
Yamaha DM 2000 Version 2 Manuel du propriétaire

Input Channels

An Input Channel from the Console window is shown below.
S
T
V
A
SOURCE parameter
1
This parameter is used to select an Input source. To select an
Input source, click the parameter and choose from the list that
B
appears.
B
Bus Out routing buttons
C
These buttons are used to route the Input Channel's signal to
D
one or more of the Bus Outs.
5
6
C
STEREO button
7
This button is used to route the Input Channel's signal to the
8
Stereo Out.
9
D
DIRECT button
J
K
This button turns on and off the Input Channel's routing to its
Direct Out.
L
E
Direct Out destination
M
This parameter is used to select a Direct Out destination. To
N
select a destination, click the parameter and choose from the list
that appears.
O
P
F
PHASE button
Q
This button is used to reverse the signal phase of the channel.
G
INSERT button
This button is used to turn on and off the Input Channel's Insert.
H
GATE button
R
This button is used to turn on and off the Input Channel's Gate.
I
Gate open & closed indicators
These indicators display whether the Gate is open (green) or
closed (red), when the Gate is turned on.
J
Gate Threshold display
This display shows the Threshold setting of the Gate. The value
can be set by dragging.
U
K
COMP button
W
This button is used to turn on and off the Input Channel's Com-
X
Y
pressor.
Z
L
Compressor curve display
This display shows the Compressor's curve.
M
EQ button
a
This button is used to turn on and off the Input Channel's
4-band Parametric Equalizer.
N
EQ curve display
This display shows the Equalizer's curve, which
can be set by dragging.
b
O
DELAY button
This button is used to turn on and off the Input Channel's Delay
function.
Input Channels
Studio Manager—Owner's Manual
16